home *** CD-ROM | disk | FTP | other *** search
/ Columbia Kermit / kermit.zip / newsgroups / misc.20000824-20010305 / 000084_news@columbia.edu _Sun Oct 22 19:09:50 2000.msg < prev    next >
Internet Message Format  |  2020-01-01  |  3KB

  1. Return-Path: <news@columbia.edu>
  2. Received: from watsun.cc.columbia.edu (watsun.cc.columbia.edu [128.59.39.2])
  3.     by fozimane.cc.columbia.edu (8.9.3/8.9.3) with ESMTP id TAA21465
  4.     for <kermit.misc@cpunix.cc.columbia.edu>; Sun, 22 Oct 2000 19:09:50 -0400 (EDT)
  5. Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.59.30])
  6.     by watsun.cc.columbia.edu (8.8.5/8.8.5) with ESMTP id TAA14284
  7.     for <kermit.misc@watsun.cc.columbia.edu>; Sun, 22 Oct 2000 19:09:49 -0400 (EDT)
  8. Received: (from news@localhost)
  9.     by newsmaster.cc.columbia.edu (8.9.3/8.9.3) id TAA12482
  10.     for kermit.misc@watsun.cc.columbia.edu; Sun, 22 Oct 2000 19:06:10 -0400 (EDT)
  11. X-Authentication-Warning: newsmaster.cc.columbia.edu: news set sender to <news> using -f
  12. Message-ID: <39F372B3.C3AC6A78@adelaide.edu.au>
  13. Date: Mon, 23 Oct 2000 08:35:23 +0930
  14. From: Arthur Marsh <arthur.marsh@adelaide.edu.au>
  15. Organization: The University of Adelaide - Information Technology Services
  16. Subject: Re: No Carrier
  17. To: kermit.misc@columbia.edu
  18.  
  19. Mark Sapiro wrote:
  20. > Jeffrey Altman <jaltman@watsun.cc.columbia.edu> wrote:
  21. > | In article <9jGH5.66100$bI6.2391998@news1.giganews.com>,
  22. > | Steve <steve@baus-systems.com> wrote:
  23. > | :
  24. > | : The problem is if we are going
  25. > | : over a modem, the phone line is dropped when we exit K95.
  26. > | If you put a breakout box on the serial port you will see that the
  27. > | Windows serial port driver drops the DTR signal every time the device
  28. > | is closed.  The device is closed each and everytime K95 terminates
  29. > | unless the device handle was passed to K95 when it is started.  When
  30. > | DTR is dropped the modem hangs up the phone call.
  31. > At least some modems can be set to ignore the DTR signal and not
  32. > drop carrier when DTR drops.  The 'AT' command to tell the modem
  33. > to ignore DTR is usually '&D0'.
  34. > Of course if you use this option, you can't use DTR to tell the
  35. > modem to answer a ring.  You have to tell the modem to auto
  36. > answer after n rings (usually with'S0=n').
  37.  
  38. Not necessarily.
  39.  
  40. DTR isn't for modem to DTE control, it's for the DTE to hangup a call
  41. (by dropping DTR).
  42.  
  43. Of course the RI (Ring Indicate) line on the modem's serial port will
  44. go  on and off when there's a call (not that it's usual to have one's
  45. software detect it), and if the modem is set to verbose mode there will
  46. be the string "RING" followed by a carriage return appearing from the
  47. modem. Similarly there is a numeric code for "RING" if the modem is in
  48. numeric response mode.
  49.  
  50. Arthur.
  51.  
  52. > These commands can be in the modem init string.
  53. > --
  54. > Mark Sapiro <msapiro@value.net>       The highway is for gamblers,
  55. > San Francisco Bay Area, California    better use your sense - B. Dylan
  56.  
  57. -- 
  58. http://online.adelaide.edu.au/doclib.nsf/Refs/Official_Email_Disclaimer
  59. ----------------------------------------------------------- 
  60. This email message is intended only for the addressee(s) 
  61. and contains information which may be confidential and/or
  62. copyright. If you are not the intended recipient please
  63. do not read, save, forward, disclose, or copy the contents
  64. of this email. If this email has been sent to you in 
  65. please notify the sender by reply email and delete this 
  66. email and any copies or links to this email immediately 
  67. from your system. No representation is made that this email
  68. is free of viruses. Virus scanning is recommended and is 
  69. the responsibility of the recipient.